Phone Hours
Mon-Fri
9AM - 5 PM
Central Time
Local: 325-227-6903
Toll Free: 866-807-4337
Email: sales@electricrider.com Service Dept: 325-227-6903 Go green with a company who will back
you up! Buy with confidence, we'll be here when you need us!
ElectricRider
1301 Pulliam Street
San Angelo, TX 76903
In our 10th year of service to the electric bike and LEV community
Complete systems from ElectricRider include
everything you need to convert your pedal bike at home or at a bike shop, and we
do a lot of the work for you. The wheel is laced to the motor and the batteries
are pre-wired. Although Phoenix II systems are priced for the DIY market, we
don't make you work very hard for it. Considering a Phoenix II system a DIY
project would be similar to considering a new coffee table you must assemble a
DIY project. There's a little assembly required, but nothing difficult. Every component we ship is tested just prior to shipment. Our goal is
zero defects in our customers' hands.
Power System Only kits from ElectricRider
include the main components necessary to convert your bike to electric except
batteries, charger, and a mounting system. The wheel is laced to the motor. Every
component we ship is bench tested just prior to shipment. The Power System
Only kit was created for those who prefer to experiment with other battery
technology, or already have a good battery source. If you do not have a
battery and charger, and do not have plans to purchase them elsewhere, order the complete kit rather than the Power System Only
kit.
Here are pictures of individual PARTS
for your perusal. You will also find hub system parts under parts categories.
Motor
We offer RoadRunner motors in both front and rear versions.
RoadRunner motors are brushless and require no maintenance.
Spokes
We use 12 gauge spokes on 20" and larger rims. Normal bike spokes are 14 gauge.
Heavier spokes mean less spoke maintenance and a stronger wheel.
Rim
RoadRunner is available with 16", 20", 24",
and 26" rims. All but the 16" are
double-walled. We can lace RoadRunner to 700C rim, but we do not recommend
it. We like outstanding performance and reliability, and we think the 700C
rim is just a bit too large for RoadRunner's torque..
Lacing
We lace the motor to the rim on our bench. We tighten the
spokes to the correct tension, and make sure the wheel is true before
shipping.
Controller
The 3625 system comes with a 36 volt 25amp controller (900
watts). The 3625 controller includes connections for optional cruise
control and brake inhibits.
Throttle
You get your choice of any throttle we offer. If you do not
specify, you will receive a thumb throttle with gauge. You can see
pictures of all the throttles we offer on our parts page.
If you have twist shifters, choose a
thumb throttle because the shifters take the space on the handlebar used
by other models.
Rack / Bag / Battery Brackets
We ship a Topeak rack and Topeak Bag with our RoadRunner
kits. The Topeak brand offers high quality material and a sliding/locking
mechanism for the bag to attach to the rack. This bag/rack combo makes
removing your batteries an easy task that takes only seconds. The bag has
a top trunk portion, and also 2 concealed panniers that fold out for more
storage space. The batteries take up most of the trunk portion, while the
panniers are completely empty for storage. For information about our
battery brackets, click here.
Batteries
RoadRunner kits come with 12V 10AH batteries, DD10-12T2.
The 36v kit has 3 batteries. If your kit is purchased from ElectricRider,
your batteries will come pre-wired unless otherwise requested. You have
the option to upgrade to any batteries we carry for only the difference in
price. A higher amp hour battery pack increases range, but adds weight.
Fuse
Wire set
Keyswitch
Charger Port
Connector to controller
The wire set for a RoadRunner system includes a 40amp fuse and fuse
holder, charger port, key switch, jumper wires, and a 50amp Anderson power
connector for the main power to the controller. This wire set is pre-made
for easy installation and use. If you purchase your system from
ElectricRider, we pre-wire your batteries using this wire set.
Charger
Standard charger is a generic. You may upgrade to Joule or
Soneil. The Joule brand is our best value, but for those who need reverse
polarity protection and dual input voltage, Soneil is the best choice. For
charge time, divide the AH (amp hour) rating of the battery by the amp
rating of the charger. This will give you the approx. charge time in
hours. For example, it would take 4 hours to charge a 12AH battery pack
with a 3 amp charger.
Cruise Control / Brake inhibits
(Optional)
Cruise control and brake inhibits are an upgrade option, but
are not included as part of the RoadRunner kit. The cruise control
functions almost like the one in your car, keeping your bike at the speed
you set. The brake inhibits are a safety feature that cut the power to the
motor when a brake lever is pulled. We recommend you always use brake
inhibits when using cruise control for safety reasons.
Spoke Wrench
We include a spoke wrench with all of our kits.
Things you may want to add:
Lights, Mirrors, Double Kickstand. Lights and mirrors improve the safety of your
ride. Since adding a Phoenix II system to your frame makes your frame much
heavier, a double kickstand may be desired in order to keep your bike from
falling. Regular bicycle kickstands tend to bend, break, or simply won't hold
the extra weight of your Phoenix II. Double kickstands can be cut or modified to
offer the desired fit to your frame. For all other accessories, please browse the selection
on our Accessories
page.
Since we assemble and package kits at our shop, we can make any
substitution you desire. For instance, if you want 20AH batteries with your
Phoenix II instead of the standard 12AH batteries, we'll substitute the 20AH
batteries for only the difference in price. Bottom line, we want you to be as
satisfied as possible with your new Phoenix II system. While assembly line
production is the most efficient method for building kits, we will stray from
our assembly line production to assure our customers receive the best system for
their application.
Phone Hours
Mon-Fri
9AM - 5 PM
Central Time
Local: 325-227-6903
Toll Free: 866-807-4337
Email: sales@electricrider.com Service Dept: 325-227-6903 Go green with a company who will back
you up! Buy with confidence, we'll be here when you need us!
ElectricRider
1301 Pulliam Street
San Angelo, TX 76903
In our 10th year of service to the electric bike and LEV community
