Phone Hours
Mon-Fri
9AM - 5 PM
Central Time
Local: 325-227-6903
Toll Free: 866-807-4337
Email: sales@electricrider.com Service Dept: 325-227-6903 Go green with a company who will back
you up! Buy with confidence, we'll be here when you need us!
ElectricRider
1301 Pulliam Street
San Angelo, TX 76903
In our 10th year of service to the electric bike and LEV community
Complete systems from ElectricRider include
everything you need to convert your pedal bike at home or at a bike shop, and we
do a lot of the work for you. The wheel is laced to the motor and the batteries
are pre-wired. Although Phoenix II systems are priced for the DIY market, we
don't make you work very hard for it. Considering a Phoenix II system a DIY
project would be similar to considering a new coffee table you must assemble a
DIY project. There's a little assembly required, but nothing difficult. Every component we ship is tested just prior to shipment. Our goal is
zero defects in our customers' hands.
Power System Only kits from ElectricRider
include the main components necessary to convert your bike to electric except
batteries, charger, and a mounting system. The wheel is laced to the motor. Every
component we ship is bench tested just prior to shipment. The Power System
Only kit was created for those who prefer to experiment with other battery
technology, or already have a good battery source. If you do not have a
battery and charger, and do not have plans to purchase them elsewhere, order the complete kit rather than the Power System Only
kit.
Here are pictures of individual PARTS
for your perusal. You will also find hub system parts under parts categories.
Motor
We offer RoadRunner motors in both front and rear versions.
RoadRunner motors are brushless and require no maintenance.
Spokes
We use 12 gauge spokes on 20" and larger rims. Normal bike spokes are 14 gauge.
Heavier spokes mean less spoke maintenance and a stronger wheel.
Rim
RoadRunner is available with 16", 20", 24",
and 26" rims. All but the 16" are
double-walled. We can lace RoadRunner to 700C rim, but we do not recommend
it. We like outstanding performance and reliability, and we think the 700C
rim is just a bit too large for RoadRunner's torque..
Lacing
We lace the motor to the rim on our bench. We tighten the
spokes to the correct tension, and make sure the wheel is true before
shipping.
Controller
The 3625 system comes with a 36 volt 25amp controller (900
watts). The 3625 controller includes connections for optional cruise
control and brake inhibits.
Throttle
You get your choice of any throttle we offer. If you do not
specify, you will receive a thumb throttle with gauge. You can see
pictures of all the throttles we offer on our parts page.
If you have twist shifters, choose a
thumb throttle because the shifters take the space on the handlebar used
by other models.
Spoke Wrench
We include a spoke wrench with all of our kits.
Things you may want to add:
WireSet includes fuse, jumpers, charger port, and connection to controller.
If your battery already comes with these parts, a wireset is not needed, but if
it doesn't, the cost of the set is quite a bit less than the individual
components.
Lights, Mirrors, Double Kickstand. Lights and mirrors improve the safety of your
ride. Since adding a Phoenix II system to your frame makes your frame much
heavier, a double kickstand may be desired in order to keep your bike from
falling. Regular bicycle kickstands tend to bend, break, or simply won't hold
the extra weight of your Phoenix II. Double kickstands can be cut or modified to
offer the desired fit to your frame. For all other accessories, please browse the selection
on our Accessories
page.
Phone Hours
Mon-Fri
9AM - 5 PM
Central Time
Local: 325-227-6903
Toll Free: 866-807-4337
Email: sales@electricrider.com Service Dept: 325-227-6903 Go green with a company who will back
you up! Buy with confidence, we'll be here when you need us!
ElectricRider
1301 Pulliam Street
San Angelo, TX 76903
In our 10th year of service to the electric bike and LEV community
